A bent hat, a tufted beard, and two little mittens wrapped around a present give this Christmas gnome quilt block its character. The diagonal strips frame the gnome like a patchwork border, with plaid, pine sprigs, and poinsettias peeking out around him. The finished block measures 16 × 16 inches, a practical size for a holiday pillow or the center of a small wall hanging.
The block combines straight-sewn patchwork with raw-edge appliqué. You’ll piece the cotton background in rectangular sections, turn it on point for the final trim, and then add the gnome in layers. The printable pattern includes the cutting measurements, a map of the diagonal strips, and full-size templates for the hat, beard, gift, and smaller details.
For the traditional Christmas palette, mix scarlet snowflakes with forest green holly and cream poinsettias. Use busy prints farther from the face and a quiet tone-on-tone cream in the center. A wreath of greenery or a single large poinsettia reads especially well in the longer diagonal strips. To center a favorite flower, trace the visible part of its strip onto translucent paper and audition the print through that window before cutting.

The cover shows the same design in royal blue, dusty ice blue, ivory, and antique gold. A navy plaid gives the outer strips definition, and gold branches bring warmth to the cooler fabrics. A gold ribbon and three small gold berries tie the gift to the holly sprig on the hat. Whichever palette you choose, pick a nose fabric that stands out against both the beard and the hat brim.
Piece the Background and Trim It on Point
Cut the fabric rectangles with the grain and label them as you go. The two cream prints can look very similar on the cutting table, especially from the back. Use the assembly diagram to keep the longer bands in the right order and to see where the prints will fall after trimming.
Once the background is sewn, use the full-size guide to mark a 16½-inch square on the diagonal. The guide keeps the bands running in the right direction and leaves a quarter-inch seam allowance around the finished block. The freshly cut edges are on the bias, so handle them gently and staystitch just inside the outer edge before working on the gnome.
Build the Gnome in Layers
Start with the coat and beard, then check the position of the tall hat and its bent tip. The brim overlaps the top of the beard, and the oval nose sits across that join. Arrange the parcel and the ribbon before placing the mittens so the gnome looks as though he’s holding the gift. The hat tip should just tuck behind the round pom-pom.
Let the appliqué cool flat after fusing. A short straight stitch works well around the smallest berries, and a narrow zigzag gives the larger shapes a clean edge. For the beard, use cream thread to sew a few gently curved lines from beneath the nose toward the tips. Those lines give the beard texture even when you use a plain ivory cotton.
Finish It as a Holiday Pillow or Wall Hanging
For a pillow, add batting and a lightweight backing to the block front, then quilt the diagonal strips before attaching the pillow back. After quilting, square up the front, cut the pillow back to match, and sew the two together with a quarter-inch seam. For a wall hanging, try a narrow plaid binding to echo the diagonal bands. Keep the quilting around the holly and ribbon simple so their edges stay visible.
Download the Christmas Gnome Quilt Block Pattern PDF
The PDF includes the fabric guide, a complete cutting chart, diagrams for the pieced background, an actual-size trim and placement guide, and mirrored appliqué templates. Print the template pages at 100% and measure the one-inch test square before cutting.
Plaid works especially well in the diagonal frame when one of its stripes runs parallel to the long edge of the fabric rectangle. Once you turn the background on point, that stripe will follow the seam and lead the eye toward the gnome. Save the boldest floral for a wider strip, where enough of the print will show after trimming.
Before sewing the long seams, match the ends and midpoints of the adjoining sections, then pin between those points. This helps keep the bands flat as they go through the machine. Press the seams open and check that the pieced background measures 24½ inches square before centering the diagonal trim guide.
Christmas Gnome Quilt Block Pattern PDF
For a softer finish, try cutting the center out of the fusible web for the coat, beard, and crown. Leave a continuous ring about ¼ inch wide around each shape to hold the edges in place for stitching. Keep the full backing on small pieces like the holly berries and ribbon knot so they stay put as you sew.
To make a holiday table runner, place a 16-inch finished square of poinsettia fabric between two gnome blocks. Turn each gnome so its gift faces the nearest short edge and its hat points toward the middle. The runner top will finish at 16 × 48 inches before borders, with a gnome facing each end of the table.
